military fuseholders FHL12U panel mount-lamp indicating hgc form no. FHL12U page 1 of 1 bif doc #2135 bussmann 12-17-98 sb98107 rev. a catalog symbol: FHL12U lamp indicating meets military specification - mil-f-19207/3 no agency listings for military 13/32?x 1-1/2?fuses: f60, f07, & f09 series commercial equivalent : hgc 1.38" (34.9mm) 0.156" dia. + 0.002" (4.0mm + 0.05mm) 0.281" (7.1mm) 1.062" (27.0mm) 0.531" (13.5mm) 1.230" (31.2mm) 1.062" (27.0mm) 1.45" rad. (36.8mm) 1.14" dia. (29.0mm) drilled mounting hole dimensional tolerance + 0.005" (0.13 mm) 0.81" (20.6mm) 4.125" (106.4mm) the only controlled copy of this bif document is the electronic read-only version located on the bussmann network drive. all ot her copies of this bif document are by definition uncontrolled. this bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applicatio ns. bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. bussmann also reserves the right to change or update, withou t notice, any technical information contained in this bulletin. once a product has been select- ed, it should be tested by the user in all possible applications. dimensional data specifications knob clear transparent bayonet type (fuses mount in fuse clips of a fuse carrier) terminals threaded stud type; tooth lockwashers and hex nuts. enclosure unsealed?FHL12U) iaw mil-std-108. panel thickness 0.125 max. rating 30 amperes. 90?00 volts. resistor 330,000 ohms. body material grey; meets mil-m-14; fire retardant iaw mil-std-454. qualified and tested to mil-f-19207. group a, b and c. mechanical mil-std-202. method 207. method 1 shock terminal strength 20 lbs. torque 15 lbs.-inch.
|